Use of glyphosate (Roundup) to control field bindweed in blackberries

Mar 11, 2014

Use of glyphosate (Roundup) to control field bindweed in blackberries

Mar 11, 2014

From the UC Strawberries and Caneberries blog :: Sept. 11, 2013

 

Photo 2: Demonstration of ropewick applicator. Roundup mix, stored in handle, seeps out rope at bottom of applicator.
Photo 2: Demonstration of ropewick applicator. Roundup mix, stored in handle, seeps out rope at bottom of applicator.
Field bindweed, Convolvulus arvensis, also known locally as morning glory, is a persistent weed pest in blackberries grown on the Central Coast of the California. Much of this stems from the long period of time between plant establishment and final removal of the crop some five to six years later.

While cultivation of the aisles between the hedgerows is successful in keeping the field clear of most weeds, field bindweed is another matter. Not only does field bindweed establish very deep root systems which frustrate control by cultivation, but the lengthy vines of this plant grow into the hedgerow and even up onto the plants themselves (Photo 1). Spray applications of translocated herbicides like Roundup are risky due to sensitivity of blackberry to spray drift. For this reason we have selected ropewick application methods to reduce the possibility of spray drift and crop injury.

Photo 4: Blackberry primocane in midst of glyphosate killed bindweed. Plant was not touched by the herbicide.
Photo 4: Blackberry primocane in midst of glyphosate killed bindweed. Plant was not touched by the herbicide.
The study described here is an experiment of two methods of wick applications of glyphosate (Roundup). One method, pictured below, is of a ropewick applicator (Photo 2) which applies a 33% volume per volume (v/v) dilution of formulated product through the ropewick applicator directly to the bindweed leaves by briefly passing over the area in a purposeful back and forth swinging motion. The second method, used occasionally on woody vines which die slowly, was to clip approximately 1”x1” sponges soaked with a 33% v/v dilution of formulated product with colorful refrigerator magnet clips to individual bindweed leaves (Photo 3). In both cases, great care was taken to avoid contact with blackberry plant parts, especially canes hanging down close to the ground. Please note—blackberry is very sensitive to Roundup (Photo 7) and contact with foliage must be absolutely avoided.

As can be seen from the pictures below (Photo, 3, 4 and 5), after two weeks both methods are quite effective in controlling field bindweed in blackberries. It should be noted that the clip method, while quite effective in controlling field bindweed, is far more time consuming than the ropewick applicator and not recommended.

It is lastly important to note that regular retreatment of the field bindweed especially in the fall will be more successful with the ropewick method described here. One should treat regularly but not too frequently and every month to six weeks should work. Let the bindweed regrow some, since it is going into the fall and it is storing starch reserves for its roots. As the bindweed makes sugars in its leaves it is sending that sugar downward into its roots deep in the ground, and this is the time to send some glyphosate into those roots. These roots are the bindweed wheelhouse and this is where to hit it where it hurts.

The use of glyphosate (Roundup) is extensively written about in this article. Before using any of these products, check with your local Agricultural Commissioner's Office and consult product labels for current status of product registration, restrictions, and use information.